Trough auger conveyors
The trough auger conveyor is used for conveying grain, feed, meal groats or materials that can be bulked in a horizontal angle or in acclivity. The trough auger can be produced in different assembling modes. More connecting possibilities can be chosen at the inlet and the outlet. 20-30 t material can be conveyed by the trough auger. It is suggested to grain, meal groats or materials that can be bulked in a horizontal angle or in acclivity. The trough auger can be used for loading silos or emptying flat silos.
- Galvanized build-up
- A double house at the power axle
- A divided intermediate bearing, made of special alloy
- Extensions are galvanized after welding
|Length (m)||ST 152||ST 205|
|0-4||1,1 kW||1,1 kW|
|4-6||1,1 kW||1,5 kW|
|6-9||1,5 kW||2,2 kW|
|9-12||2,2 kW||3,0 kW|
|12-15||3,0 kW||4,0 kW|
|15-18||4,0 kW||5,5 kW|
|18-20||5,5 kW||5,5 kW|
The extensions can be produced with different length. They are always assemblied with a divided intermediate part and connecting sections.
Trough auger with a 2 m outlet.
An extensional section with a 2 m outlet, a divided bin.
An extensional section with a 2 m divided intermediate part.
An extensional section with a 1,5 m divided intermediate part.
An extensional section with a 1 m divided intermediate part.
An extensional section with a 1 m outlet and a divided intermediate part.
Picture 1: An auger with an inlet, two bull-wheel locking latch and an outlet.
Picture 2: A latch with a bull-wheel and an electric motor, and remote control
Picture 3: An outlet, it can be screwed under the auger
Picture 4: An intermediate section 200/150, assemblied with an outlet, an auger with an inlet
Picture 5: A divided bin, specially alloyed holder, divided, a special alloyed bearing
Picture 6: A square inlet